- Can use house air supply and chiller to run low temperature expts (ie no N2 needed)
- turn off BVT3000 before making connections
- connect BVT3000 to Xtreme at ports labelled "to BCU"
- connect UPS (at L620P) to chiller power supply
- turn on BVT3000
- set air flow to 670 LPH; and heater to 10% max
- turn on "spinning" as this line is routed to auxillary/shim air
- use calibration curve below to set actual temperature btw -60 to 0C
Chiller setup