rpar DOSY all			# read in Bruker DOSY    

gpnam6 SMSQ10.100		# BP gradient
gpnam1 SMSQ10.100		# crusher gradient
gpnam7 SMSQ10.100		# crusher gradient

pulprog stebpgp1s19		# dosy pulprog

p19 600us			# crusher ~600us / getting GCON errors? change to 800us or greater
p30 1m				# little delta*0.5

gpz6 100			# BP gradient
gpz1 -20.0 			# crusher 
gpz7 -17.13			# crusher 

d1 2s				# recycle delay
d16 200us			# gradient ring down
d19 166us			# 3919 binomial delay
d20 60m				# big delta
d21 5m				# eddy current delay ~5m

##############################
#   H SETTINGS               #
##############################

getprosol 1H 8.0 -11.14		# plw 13.0 watts/-11.14 dbW

2 sw 12				# sw in ppm
2 td 16k			# pts 16k -> ~1.3s 
o1 2355				# center in Hz

1 FnMODE QF			# acqu mode in t1 for pseudo 2D
1 MC2 QF			# acqu mode in t1 for pseudo 2D
1 td 16				# assuming 16 t1 pts

ns 16				# ns*16
ds 16				# ds*16

##############################
# processing commands

2 SI 16k			# processing pts

2 WDW EM			# processing type
2 lb 3.0			# LB in Hz

2 ABSG 5			# BC polynomial exponent
2 BC_mod quad			# BC mode
#2 absf1 12.0			# BC left side in ppm
#2 absf2 0.0			# BC rights side in ppm
2 phc0 65			# zeroth order phase correct

1 SI 16 			# processing pts
1 ABSG 0			# BC polynomial exponent
1 BC_mod no  			# BC mode
1 WDW no			# processing type
1 lb 0.0			# LB in Hz

xau dosy 5 95 16 l n y          # setup up dosy gradient stepping

##############################
##############################
##############################